Dyson DC07 Hose Assembly

904125-51

Genuine Dyson DC07 replacement vacuum hose stretches six time its original length and fits over the wand. The replacement vacuum hose is steel in color and fits all DC07 model vacuums. The hose includes the original cuffs on each end making a complete and original hose assembly, known under current Dyson part number904125-51. No tools or other parts are required for replacement, simply push releases on the handle to release the wand. Now pull the hose down towards the end of the wand and press the small catches on each side of the hose cuff, pulling the cuff off of the wand. Now follow the hose to the base of the vacuum, pulling the hose away from the vacuum. Here you will find another cuff with a latch at the base of the vacuum.Just pull back the latch and release the hose from the vacuum

$46.03

Availability: In stock

  • Description
  • Specs
  • Reviews
  • Add Review

Details

Genuine Dyson DC07 replacement vacuum hose stretches six time its original length and fits over the wand. The replacement vacuum hose is steel in color and fits all DC07 model vacuums. The hose includes the original cuffs on each end making a complete and original hose assembly, known under current Dyson part number904125-51. No tools or other parts are required for replacement, simply push releases on the handle to release the wand. Now pull the hose down towards the end of the wand and press the small catches on each side of the hose cuff, pulling the cuff off of the wand. Now follow the hose to the base of the vacuum, pulling the hose away from the vacuum. Here you will find another cuff with a latch at the base of the vacuum.Just pull back the latch and release the hose from the vacuum.

The hose replaces Dyson part numbers: 904125-14, 904125-15, 904125-16, 904125-17, 904125-18, 904125-19, 904125-20, 904125-28, 904125-30, 904125-31, 904155-32, 904125-51. The parts numbers may also be known to start with "DY", such as DY-904125-51.

The hose allows the user to release the wand from the vacuum and extend the hose 6x the original hose length. The extended hose plus the full handle and wand length support the DC07 to reach truly hard to get to or out of reach areas like ceilings, fans, tall shelves, etc. The wand can also be removed from the hose, and hose used alone with accessories to perform all types of cleaning, like stairs, vehicles, furniture, etc.

DC07 Vacuums have been around for well over 10 years, therefore, the hose after such long periods of use may become worm, damaged, or torn. Typical replacement is caused by minor tears in the hose. After replacing an old hose, many vacuum users think the new hose is shorter than the original, but that is not the case. Many years of use will cause the original hose to release to full length very easily, without having to stretch or pull the hose to full length. The new hose will take time and use to relax to full length more easily. In time, the replacement vacuum hose will relax and stretch to full and proper maximum length.

So, if you own a DC07, you've likely had the beloved vacuum for over 10 years! Don't risk suction leaks or loose fits caused by imported generic parts... decreasing overall performance and cleaning ability. Keep it original and keep it working right with Dyson Genuine replacements.

A list of model names the Dyson DC07 hose will fit are: Animal, all floors, multi-floors, full gear, full kit, and low reach.

When replacing your hose, be sure to purchase a true and genuine Dyson replacement. It has been reported that generic replacement hoses do not seal seal properly and allow suction leaks, decreasing the overall suction and performance of the vacuum. In addition, generic hoses do not have the the same cuff locks and sealing rings, preventing the hose from locking onto the wand and allowing the hose to fit loosely and fall off the wand. Some generic part cuff locks have also been reported not to function. The savings offered on some generic parts may result in decreased performance and parts that simply do not work properly. Investing in a true and genuine Dyson replacement vacuum hose ensures function, operation, and performance you always expect.

A more detailed description for hose replacement. For users familiar with the wand and hose use, replacement should not take more than a minute or two:

1.) Remove the wand from the seated position by pressing the wand release.
2.) Pull the hose all the way to the end of the wand.
3.) Pull the hose off the wand at the hose cuff.
4.) At the base of the DC07 vacuum, pull the hose away from the vacuum and you will find a tab / clip present. Pull the clip away from the vacuum and pull the hose upward.
5.) Once the clip has been released and hose pulled upward, it should release from the vacuum.
6.) Reverse this same process to attach the new replacement Dyson DC07 hose.

The hose, and all parts from Vacuum-Direct are Genuine Dyson Replacements. No other parts match the quality or life of original Dyson parts.

Additional Information

Product Specification Manufacturer: Dyson Parts Manufacturer Part No: 904125-51 Dyson Part Fits: Dyson DC07
UPC No
Vacuum Type No
Manufacturer No
Price $46.03

Write Your Own Review

Only registered users can write reviews. Please, log in or register